Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

FIXING OF EMERGENCY EXIT DOOR AT NBP GUMBAT BRANCH PESHAWAR TICKET 139735

Regional Office (National Bank of Pakistan (NBP))

Reference: P177300

Closes in 3 days

Tender information

Published
Submission deadline
Procurement method
Petty Purchase
Procuring agency
Regional Office (National Bank of Pakistan (NBP))

Tender description

  • FIXING OF EMERGENCY EXIT DOOR AT NBP GUMBAT BRANCH PESHAWAR TICKET 139735

Technical Specifications

FIXING OF EMERGENCY EXIT DOOR AT NBP GUMBAT BRANCH PESHAWAR TICKET 139735

Specification
FIXING OF EMERGENCY EXIT DOOR AT NBP GUMBAT BRANCH PESHAWAR TICKET 139735
Specification
Dismantling and removing of existing masonry walls, , Seel doors, and any other material etc the dismentled materials to be stacked at desired location within the bank premises as per instructions by Engineer including disposal of debris from site outside the muncipility limit complete in all respects as per drawings. job
Specification
BRICK MASONARY WORK
Specification
Providing and laying brick masonary/ Solid Block with 1:4 cement sand mortar in super structure, incluing raking out joints, scaffolding, curing, drilling for walls/ Ramps where required at any floor/height complete in all respects as per drawings, specifications and as directed by the Consultant/Engineer.
Specification
9'' (228 mm) Thick or Above Cft
Specification
4" or 4-1/2'' (114 mm) Thick Sft
Specification
PLASTER WORK
Specification
Providing and applying Plaster (thickness and cement / sand ratio as indicate in sub items below) including making edges and corners, curing, scaffolding etc at any floor/height, complete in all respects as per drawings, specifications and as directed by the Consultant/Engineer.
Specification
12mm Thick in (1:4) on walls Sft
Specification
INTERNALPAINT WORKS
Specification
Providing and applying Paint on internal/ External walls of ICI or Berger including rubbing with sand stone, filling the uneven surfaces with putty, rubbing with sand paper and preparation of surface perfect in all respects, applying one coat of primer on prepared surface of plastered and finish paint coats as indicated in sub items, complete in all respects as per drawings.
Specification
Plastic Emulsion Paint ash white (on Internal walls) Sft
Specification
Weather shield paint on external walls (approved by the Engineer) Sft
Specification
Provide, mix, place and vibrate reinforcement cement concrete in the volumetrix mix. 1:2:4 at any floor using one part of cement to 2- part sand and 4-parts of crush from the approved source as per specification. cube crushing strength of 3000 psi at 28 days, finishing the necked surface and curing etc, including water tight finishing the necked surfaces and curing etc, form work including its sub-sequent removal, complete in all respects as per drawings, specifications and as directed by the Consultant/Engineer.
Specification
II) Beam / Lintels/ Shelves/Slab etc. Cft
Specification
STEEL REINFORCEMENT
Specification
P/F Grade 60 steel reinforcement deformed bars at any floor with minimum yield strength of 60000 psi as per ASTM standards A-615, including cost of binding wire of 16-SWG, chairs. (Wastage of bars, Over laps etc. is to be Contractors accounts). kgs
Specification
EMERGENCY EXIT DOOR
Specification
Providing and fixing of M.S steel sheet 14SWG on both sides and M.S pipe frame 16SWG frame at inner side of leaf, door frane of M.S angle Iron+M.S dtrip, applying of approved enamel paint and all necessary joinery details, complete in all respect. Sft
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS