Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

Renovation / Refurbishment work of Executive Washroom at 2nd floor (L/S) NBP H.O Karachi

National Bank of Pakistan (Engineering)

Reference: P177327

Closes in 3 days

Tender information

Published
Submission deadline
Category
Civil construction
Procurement method
Single Stage-One Envelope
Procuring agency
National Bank of Pakistan (Engineering)
Location
Karachi , Sindh
Bid security
0.00 PKR

Tender description

  • Renovation / Refurbishment work of Executive Washroom at 2nd floor (L/S) NBP H.O Karachi

Technical Specifications

Renovation / Refurbishment work of Executive Washroom at 2nd floor (L/S) NBP H.O Karachi

Specification
DISMANTLING/SHIFTING & DISPOSAL
Specification
a) Dismantling / removing of existing constructed structures with all necessary precautionary measures, including but not limited to block masonry, RCC slab, dado/ floor tiles, wooden/ glass door, furniture, MS / wooden windows and doors, wooden cabinets, wooden partition, aluminum window / door / tiles, Gypsum / wooden false ceiling, AC / Electrical / Plumbing fittings /fixtures or any other items which are required to be demolished / dismantled /removed; complete in all respects; including labor, tools, equipment etc.b) Shifting and stacking of all necessary dismantled / demolished / removed material / fixtures / fittings etc. or official documents as per Serial (a) above; to designated location within or outside the existing premises of work in Karachi as per the discretion of the Employer with all necessary precautionary measures, including transportation, labor, equipment and loading / unloading, complete in all respects.c) Disposal of surplus unused/unwanted/broken stuff, material, garbage, debris etc. from the site, complete in all respects; and throwing the same outside the Municipal Limits as per the discretion and instructions of the Employer including transportation, labor, equipment and loading / unloading, complete in all respects. Job
Specification
BLOCK MASONRY
Specification
Providing and laying 4", 5" / 6" thick block masonry wall at any height set in (1:3) cement sand mortar including lifting, scaffolding, curing etc. complete in all respect and as directed by Engineer. Cft
Specification
SURFACE RENDERING
Specification
P/L 1/2" thick cement sand plaster 1:4 to walls making edges and corners, preparation of surface before plastering, finishing scaffolding, curing etc., complete in all respect and as directed by the Engineer Sft
Specification
Providing and applying water proofing comprising of 2 cost of expand brush (Acrylic polymer modified protect and decorative coating for concrete and masonry) on existing cleaned, wall & slab and then applying new cement sand plaster 1:4 mixed with Expaplast WP 100 @ 1 Kg of Expaplast WP 100 per Bag of cement, including cost of hacking of existing plaster complete in all respects. Sft
Specification
PCC FLOORING
Specification
P/L Plain Cement Concrete under floors in 2" to 3" thin required panels 1:3:6 ratio including leveling compacting, curing etc. (also includes trowel finish under carpet/under Wooden Floor). Sft
Specification
PORCELEIN TILES
Specification
Providing and laying floors of Porcelain tiles 1200mm X 600mm (grit white) 11mm thick of Roka Ceram tile imported made (China or equivalent including base mortar (2-1/2" average) thick C.C and matching colour grouting, cement slurry for fixing of tiles, complete in all respects as per drawings, specifications and as directed by the Engineer. Sft
Specification
Providing and laying 3/4" thick factory polished approved color Black Granite/ cherry pink including special works as bull nosing, straight or curved as per single piece as shown on the drawings complete with all respect. Sft
Specification
Providing, fabricating, and fixing new wooden vanity shutters made from approved quality laminated Tactile sheet with edge banding, complete with concealed hinges, handles, screws, and all necessary hardware. The work includes cutting, fitting, alignment, finishing, and adjustments to ensure smooth operation, complete in all respects as directed by the Engineer. Sft
Specification
Providing and applying Three coats of Joutn/ Gobis or equivalent matt paint after scraping, sand papering, plain surface at any height, complete with all material labour, equipment scaffolding etc. as per entire satisfaction of Engineer. Sft
Specification
Wooden Doors
Specification
Providing and fixing of Wooden Door (WD- 1A ), made with 38mm thick sandwich chipboard (tactile sheet 4024) with 19mm thick soft wood vertical rail both sides covered with approved, 9mm thick Mahagani wood edging, finish with clear NC lacquer polish, including door frame of 16 SWG GI sheet with red oxide coat covered with approved laminate/door boarder and hard wares i-e hinges, imported door lock and door stopper etc., complete with hard ware and complete with all respect as per design. Sft
Specification
PLUMBING
Specification
SOIL WASTE AND WATER SUPPLY
Specification
Providing , fixing, jointing and testing AGM pipe of approved equivalent pressure pipe, for floor and wall sewerage and water supply arrangement including valve fitting, vertical pipes and connection to vertical line, waste jali, floor trap etc. excluding fittings and fixtures, complete pipe work as approved by the Incharge Engineer.
Specification
Toilet Job
Specification
TOILET FITTINGS & FIXTURES
Specification
Water Closet
Specification
P/f European type water closet (Porta HD-9A B-D-N) or equivalent with seat cover/Flush tank of approved color with integral trap in vitreous imported quality. complete in all respect Nos.
Specification
Wash Basin
Specification
P/F wash hand basin vanity Porta or equivalent approved granit eshade and design 22' x 16" white / light color including pillar cock and all fittings etc., Complete in all respect. Nos.
Specification
Fittings
Specification
P/F of best quality imported fittings of Master/Faisal or equivalent approved quality including installation etc. Complete in all respect.
Specification
Single bib cock Nos.
Specification
Double bib cock Nos.
Specification
T- Stop Cock Nos.
Specification
TOILET ACCESSORIES
Specification
Water Mixer
Specification
P/F 15 mm dia C.P. fitting single lever of water mixer make "Master" C.P. pipe 15mm dia
Specification
For wash basin / Vanity. Nos.
Specification
Muslim Shower
Specification
P/fixing Muslim shower make by Masters, Grohi or equivalent etc including labor, material etc. Complete in all respect Nos.
Specification
Soap Dish
Specification
Providing and fixing soap dish heavy duty S.S finish master or equivalent complete in all respect. Nos.
Specification
Toilet Paper Holder
Specification
Providing and fixing toilet paper holder best quality Master make or as approved by the Incharge Engineer Nos.
Specification
Towel Rail
Specification
Providing and fixing 5mm looking glass with beveled edges of first quality Belgium made or equivalent approved make fixed with SS clips etc.complete in all respect Nos.
Specification
Hand Dryer
Specification
Providing and Fixing of best quality Hand Dryer Siemens make or equivalent. Nos.
Specification
Mirror
Specification
Providing and fixing 5mm looking glass with beveled edges of first quality Belgium made or equivalent approved. Sft
Specification
ELECTRICAL WORKS
Specification
ELECTRICAL WIRING
Specification
Supply, laying, connection and testing of following wiring types; in heavy duty PVC Conduit recessed in walls, columns, slabs, floors or fixed at Ceiling above false ceiling or in Dura duct if exposed on walls or in tray, with all necessary fixing accessories, conduit/duct accessories, pull boxes, steel pull wires complete in all respects, required as per site conditions. with make/brand of material being specified in Annexure A. (PVC insulated Copper - 300/500 Volt Grade Wires to be used)
Specification
Point Wiring (Light/Fan etc.)
Specification
From Switchboard to 1st Point (Light/Fan) with 1 x 1.5 sq.mm S/C wire from Piano Switch and 1 x 2.5 sq.mm wire common neutral including i/c P/F 10A Piano Switch in 20 mm dia. heavy duty PVC conduit/flexible pipe, recessed in walls, columns, slabs, floors or fixed at Ceiling above false ceiling with all necessary fixing accessories, conduit accessories, ceiling roses, 75 mm high PVC junction boxes, pull boxes, steel pull wires, connectors, M.S. sheet steel switch box 16 SWG with earth terminal with 2 coats of powder coating of orange colour, M.S. box shall be of the same size as that of 1, 2 or 3 upto 6 gangs flush type plate switches complete in all respects, required as per site conditions. (In case of point wiring at Ceiling, 2 X 1.5 sq.mm wires in Flexible Conduit from junction box equipped with PVC gland to light/fan fixture, will also have to be provided). Maximum wiring of 6 points (light/fan) can be pulled through 20 mm dia. PVC conduit. (The rates should be inclusive of wiring to be connected to Hanging Pendant Lights or any other Hanging Lights with interconnection between the Lights on same Wooden Frame). All PVC Conduits/Flexible Pipes etc. must be properly colored as per industrial ceiling color. Nos.
Specification
ELECTRICAL FITTINGS, FIXTURES & ACCESSORIES
Specification
Supply, Installation, testing and commissioning of following fittings/fixtures as per specified brand/make given in Annexure "A" recessed in or on wall / ceiling / column / Workstation / wooden Frame etc. complete in all respects, duly approved by Engineer Incharge prior to installation.
Specification
Light Fixtures
Specification
(The temperature / Colour Index to be got confirmed from Site Engineer before installation
Specification
LED Open Light 20W- 8" Nos.
Specification
Switch Socket Outlets / Industrial Sockets
Specification
Following SSO complete with back box i.e. M.S. box, made of 16 SWG sheet steel with earth terminal having 2 coats of powder coating of orange colour, M.S. box shall be of the same size as that of SSO.
Specification
Providing and fixing of switches and switch boards, Clipsal 5 gang/8 gang sheets Nos.
Specification
Fans
Specification
Wall Mounted Exhaust Fan 10"/12'' sweep, Metalc body, louvre type. Nos.
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS