Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

Demand for Laboratory Fixtures and Installation in Nutrition Labs at NIASR - (MS/DND/2026/71)

Procurement Directorate, (National University Of Medical Sciences (NUMS))

Reference: P186348

Closes in 6 days

Tender information

Published
Submission deadline
Procurement method
Single Stage-One Envelope
Procuring agency
Procurement Directorate, (National University Of Medical Sciences (NUMS))
Bid security
0.00 PKR

Tender description

  • Lot-1
  • Providing, fabricating, and installing a fixture table for Food Processing & Analysis Laboratory, using ZRK or Patex laminated board matching existing fixtures, with 18mm thick Verona marble top. Dimensions: 6'-0" length × 3'-0" height × 1'-11" depth
  • Providing, fabricating and installing wall cabinet using ZRK or Patex laminated board, 18 inches in height and 14 inches in depth, with 6mm thick glass front panels, fitted with hydraulic opening mechanism, complete with all necessary hardware, fitti
  • Providing, fabricating and installing cupboard of size 4'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, with 6mm thick glass front panels, complete with necessary hardware, fittings and finishing to match exist
  • Providing, fabricating and installing office table of size 4'-0" length × 2'-0" depth × 4'-0" height, made of laminated board matching existing tables, with MS pipe frame and frosted glass top, complete with all necessary fittings, welding, finishing
  • Providing, fabricating and installing laboratory sample storage cabinet, size 3'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, including laminated shelves and aluminum frame front doors fitted with 6mm thick gl
  • Providing, fabricating and installing laboratory center table, size 8'-0" length × 4'-0" width × 3'-0" height, with legs and frame made of 18 SWG MS pipes, covered with sheet on top and finished with Verona marble, complete with necessary welding, fi
  • Providing, fabricating and installing a 4'-0" long, 3-tier stainless steel (SS) rack above the wash hand basin, fabricated from 0.5" × 0.5" SS pipes, complete with necessary supports, welding, polishing and fixing at site.
  • Providing, fabrication and installation of Laboratory Hood made of high-quality laminated board, including required frame, shelves, working surface, and accessories, complete in all respects as per approved design and specifications. (plus ceiling ex
  • Providing and installation of 13 Amp duplex electrical socket points in the laboratory, including 2.5 mm² copper electrical wiring, separate earth wire, PVC conduit, boxes, and all necessary accessories, complete in all respects as per site requireme

Technical Specifications

Lot-1 — Providing, fabricating, and installing a fixture table for Food Processing & Analysis Laboratory, using ZRK or Patex laminated board matching existing fixtures, with 18mm thick Verona marble top. Dimensions: 6'-0" length × 3'-0" height × 1'-11" depth

Specification
Providing, fabricating, and installing a fixture table for Food Processing & Analysis Laboratory, using ZRK or Patex laminated board matching existing fixtures, with 18mm thick Verona marble top. Dimensions: 6'-0" length × 3'-0" height × 1'-11" depth. Measurement shall be taken from the front elevation in square feet (length × height), and payment shall be made according to the actual work executed and measured at site. Complete in all respects as per existing approved fixtures. Sft

Lot-1 — Providing, fabricating and installing wall cabinet using ZRK or Patex laminated board, 18 inches in height and 14 inches in depth, with 6mm thick glass front panels, fitted with hydraulic opening mechanism, complete with all necessary hardware, fitti

Specification
Providing, fabricating and installing wall cabinet using ZRK or Patex laminated board, 18 inches in height and 14 inches in depth, with 6mm thick glass front panels, fitted with hydraulic opening mechanism, complete with all necessary hardware, fittings and finishing to match existing fixtures. Measurement shall be taken from the front elevation in square feet (length × height), based on actual work executed at site. Sft

Lot-1 — Providing, fabricating and installing cupboard of size 4'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, with 6mm thick glass front panels, complete with necessary hardware, fittings and finishing to match exist

Specification
Providing, fabricating and installing cupboard of size 4'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, with 6mm thick glass front panels, complete with necessary hardware, fittings and finishing to match existing fixtures. Measurement shall be taken from the front elevation in square feet (width × height), based on actual work executed at site. Sft

Lot-1 — Providing, fabricating and installing office table of size 4'-0" length × 2'-0" depth × 4'-0" height, made of laminated board matching existing tables, with MS pipe frame and frosted glass top, complete with all necessary fittings, welding, finishing

Specification
Providing, fabricating and installing office table of size 4'-0" length × 2'-0" depth × 4'-0" height, made of laminated board matching existing tables, with MS pipe frame and frosted glass top, complete with all necessary fittings, welding, finishing and installation as per existing approved design.

Lot-1 — Providing, fabricating and installing laboratory sample storage cabinet, size 3'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, including laminated shelves and aluminum frame front doors fitted with 6mm thick gl

Specification
Providing, fabricating and installing laboratory sample storage cabinet, size 3'-0" width × 7'-0" height × 15" depth, made of 17mm thick ZRK or Patex laminated board, including laminated shelves and aluminum frame front doors fitted with 6mm thick glass, complete with necessary hardware, fittings and finishing as per existing approved design. Measurement shall be taken from the front elevation in square feet (width × height), based on actual work executed at site. Sft

Lot-1 — Providing, fabricating and installing laboratory center table, size 8'-0" length × 4'-0" width × 3'-0" height, with legs and frame made of 18 SWG MS pipes, covered with sheet on top and finished with Verona marble, complete with necessary welding, fi

Specification
Providing, fabricating and installing laboratory center table, size 8'-0" length × 4'-0" width × 3'-0" height, with legs and frame made of 18 SWG MS pipes, covered with sheet on top and finished with Verona marble, complete with necessary welding, fixing and finishing as per approved design.

Lot-1 — Providing, fabricating and installing a 4'-0" long, 3-tier stainless steel (SS) rack above the wash hand basin, fabricated from 0.5" × 0.5" SS pipes, complete with necessary supports, welding, polishing and fixing at site.

Specification
Providing, fabricating and installing a 4'-0" long, 3-tier stainless steel (SS) rack above the wash hand basin, fabricated from 0.5" × 0.5" SS pipes, complete with necessary supports, welding, polishing and fixing at site.

Lot-1 — Providing, fabrication and installation of Laboratory Hood made of high-quality laminated board, including required frame, shelves, working surface, and accessories, complete in all respects as per approved design and specifications. (plus ceiling ex

Specification
Providing, fabrication and installation of Laboratory Hood made of high-quality laminated board, including required frame, shelves, working surface, and accessories, complete in all respects as per approved design and specifications. (plus ceiling exhaust fan-2)

Lot-1 — Providing and installation of 13 Amp duplex electrical socket points in the laboratory, including 2.5 mm² copper electrical wiring, separate earth wire, PVC conduit, boxes, and all necessary accessories, complete in all respects as per site requireme

Specification
Providing and installation of 13 Amp duplex electrical socket points in the laboratory, including 2.5 mm² copper electrical wiring, separate earth wire, PVC conduit, boxes, and all necessary accessories, complete in all respects as per site requirements and approved specifications.

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS