Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

REPAIR AND MAINTENANCE OF KPT FLAT NO. GK-101 AT KV-05 BUILDING KEAMARI

Civil Works Dept, KPT (Karachi Port Trust (KPT))

Reference: P188016

Tender information

Published
Submission deadline
Not specified
Procurement method
Request for Quotation
Procuring agency
Civil Works Dept, KPT (Karachi Port Trust (KPT))
Location
Karachi , Sindh

Tender description

  • REPAIR AND MAINTENANCE OF KPT FLAT NO. GK-101 AT KV-05 BUILDING KEAMARI

Technical Specifications

REPAIR AND MAINTENANCE OF KPT FLAT NO. GK-101 AT KV-05 BUILDING KEAMARI

Specification
(S16) DISMANTLING AND CHISELING CEMENT CONCRETE FLOOR UPTO 50 SQM MM THICK INCLUDING DISPOSAL OF MATERIAL OUT SIDE KPT LIMIT OR AS DIRECTED BY ENGINEER IN-CHARGE. SQM
Specification
(K-3) PREPARE SURFACE AND APPLYING ½ " THICK CEMENT SAND PLASTER AT ANY HEIGHT OF RATIO 1:4, FINISHED SMOOTH INCLUDING CURING, SCAFFOLDING, CORNICES, EDGES ALL AS SPECIFIED AND DIRECTED. SQM
Specification
(M20) PROVIDING AND LAYING 6 MM (¼") THICK WHITE / COLORED PORCELAIN TILES GLAZED / MATT, OF SIZE 18"X18", MADE BY ( SHABBIR, STILE, MASTER OR EQUIVALENT), FINE DRESSED ON THE SURFACE WITHOUT SENDING LAID OVER 1½ THICK CEMENT MORTAR OF RATIO 1:2, AND IN DADOS & SKIRTING LAID OVER ½" THICK BASE OF CEMENT MORTAR 1:3 SETTING TILES IN SLURRY OF GREY CEMENT, JOINTING AND WASHING THE TILES WITH WHITE / COLORED CEMENT SLURRY ALL AS SPECIFIED OR USE OF BOND MORTAR (APPROVED MAKE) INSTEAD OF CEMENT MORTAR WHICH EVER REQUIRED, OR AS DIRECTED BY ENGINEER INCHARGE. SQM
Specification
(M19) PROVIDING AND LAYING 6MM THICK WHITE / COLORED CERAMIC TILES GLAZED / MATT, AREA NOT EXCEEDING 324 SQ INCH, MADE BY ( SHABBIR, STILE, MASTER OR EQUIVALENT), FINE DRESSED ON THE SURFACE WITHOUT SENDING LAID OVER 1½ THICK CEMENT MORTAR OF RATIO 1:2, AND IN DADOS & SKIRTING LAID OVER ½" THICK BASE OF CEMENT MORTAR 1:3 SETTING TILES IN SLURRY OF GREY CEMENT, JOINTING AND WASHING THE TILES WITH WHITE / COLORED CEMENT SLURRY ALL AS SPECIFIED OR USE OF BOND MORTAR (APPROVED MAKE) INSTEAD OF CEMENT MORTAR WHICH EVER REQUIRED OR AS DIRECTED BY ENGINEER INCHARGE. SQM
Specification
PROVIDING AND FIXING STAINLESS STEEL SINK SIZE 30" X 18" INCLUDING THE COST OF FIXING IN MARBLE TOP MAKING HOLES ETC WITH ALL NECESSARY FITTINGS LIKE WASTE COUPLING, WASTE PIPE, CONNECTIONS, KIT SCREWS, IRON BRACKETS & MAKING CONNECTION WITH THE WATER AND SEWERAGE MAIN ETC ALL AS SPECIFIED AND DIRECTED. (INCLUDING THE COST OF T-STOP COCK, STOP COCK, MIXER, FLOOR TRAP ETC) EACH
Specification
PROVIDING AND FIXING OF MARBLE TOP IN KITCHEN, 3/4" THICK WHITE/LIGHT COLOR MARBLE OF APPROVED QUALITY AND USE OF BOND MORTAR INSTEAD OF CEMENT MORTAR WHICH EVER REQUIRED OR AS DIRECTED BY ENGINEER SQM
Specification
(JJ3) PROVIDING AND FIXING ARTIFICIAL WOOD KITCHEN CABINETS WALL MOUNTED 15" DEEP FROM MAIN WALL TO OUT SIDE OF SHUTTER, COMPRISES OF ¾" THICK LASANI WOOD LAMINATED (BOTH SIDES) SHEET FOR MAIN FRAME, SHUTTERS AND DIVIDING SHELVES EDGES LIPPED WITH HARD WOOD BEADS, BACK WITH 3MM LAMINATED PLY STRENGTHEN WITH THE HELP OF 2½ X 1½ SOFT WOOD (PARTAL) FRAME FIXED WITH THE USE OF NAILS, GLUE, SCREWS, ETC COMPLETE AND WITH USE OF ALL NECESSARY FITTINGS AND FIXTURES LIKE HANDLE, LOCKS, CHANNELS, HINGES, GLASS PANELS WITH 5 MM THICK PLAIN / FROSTED / TINTED GLASS ETC AS REQUIRED AND AS DIRECTED BY THE ENGINEER INCHARGE. (COST OF 5MM THICK GLASS PANES INCLUDED, IF REQUIRED) SQM
Specification
(JJ7) PROVIDING AND FIXING ARTIFICIAL WOOD KITCHEN CABINETS FLOOR MOUNTED 22" DEEP FROM MAIN WALL TO OUT SIDE OF SHUTTER, COMPRISES OF ¾" THICK LASANI WOOD LAMINATED (BOTH SIDES) SHEET FOR MAIN FRAME, SHUTTERS AND DIVIDING SHELVES EDGES LIPPED WITH HARD WOOD BEADS, BACK WITH 3MM LAMINATED PLY STRENGTHEN WITH THE HELP OF 2" X 1" SOFT WOOD (PARTAL) FRAME FIXED WITH THE USE OF NAILS, GLUE, SCREWS, ETC COMPLETE AND WITH USE OF ALL NECESSARY FITTINGS AND FIXTURES LIKE HANDLE, LOCKS, CHANNELS, HINGES, GLASS PANELS WITH 5 MM THICK PLAIN / FROSTED / TINTED GLASS ETC AS REQUIRED AND AS DIRECTED BY THE ENGINEER INCHARGE. (COST OF 5MM THICK GLASS PANES INCLUDED, IF REQUIRED, MARBLE TOP NOT INCLUDED IN THE ABOVE AND WILL BE PAID SEPARATELY) SQM
Specification
(JJ4) PROVIDING AND APPLYING THREE OR MORE COATS OF PLASTIC EMULSION/OIL PAINT TO SPECIFIED INTERIOR SURFACES ( 3 COATS OVER 1COAT OF PRIMER) OF APPROVED MAKE, QUALITY, COLOUR/SHADE INCLUDING PREPARING SURFACES, SCRAPING, SAND PAPERING ,APPLYING ALKALI RESISTANT WALL SEALER PRIMER, PUTTY, (ZINC/CHALK,PLASTER OF PARIS )ETC. COMPLETE IN ALL RESPECT AS SHOWN ON THE DRAWINGS, SPECIFICATIONS AT ANY FLOOR AND AS DIRECTED BY THE ENGINEER HINGES, GLASS PANELS WITH 5 MM THICK PLAIN / FROSTED / TINTED GLASS ETC AS REQUIRED AND AS DIRECTED BY THE ENGINEER INCHARGE. (COST OF 5MM THICK GLASS PANES INCLUDED, IF REQUIRED, MARBLE TOP NOT INCLUDED IN THE ABOVE AND WILL BE PAID SEPARATELY) SQM
Specification
(Z42) APPLYING 3X COATS OF MATT FINISH/WEATHER SHIELD/ENAMEL PAINT APPROVED MAKE AND SHADE INCLUDING SCRAPING SAND PAPERING DUSTING AND FILLING THE HOLES, CRACKS AND INEQUALITIES, PRIMER COAT AND APPLYING PUTTY. IF ANY AT ANY HEIGHT AND IN ANY FLOOR I/C. REMOVING RUBBISH ETC., OUTSIDE K.P.T. LIMIT. NOTE: PAINT WILL BE PROVIDED BY KPT. SQM
Specification
CONTINGENCIES @ 5%
Specification
SRB @ 15%
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS