Skip to content

Opportunity overview

Active Federal PPRA / EPADS Official source

Minor Renovation work of CDM Room at NBP 258,Hub Chowki,GawadarTicket (136696)

LCMG Dept (National Bank of Pakistan (NBP))

Reference: P184416

Tender information

Published
Submission deadline
Not specified
Category
Civil construction
Procurement method
Request for Quotation
Procuring agency
LCMG Dept (National Bank of Pakistan (NBP))

Tender description

  • Minor Renovation work of CDM Room at NBP 258,Hub Chowki Gawadar Ticket (136696)

Technical Specifications

Minor Renovation work of CDM Room at NBP 258,Hub Chowki Gawadar Ticket (136696)

Specification
DISMANTLING
Specification
Dismantling and removing of existing masonry walls, False ceiling, tile Flooring/walls, Doors, Windows, Glass work,electrical, fitting fitting / fixtures, front boudry wall and grills and any other material etc. complete in all respects as per drawings. Job
Specification
BRICK MASONARY WORK
Specification
Providing and laying Block /brick masonary with 1:4 cement sand mortar in super structure, incluing raking out joints, scaffolding, curing, drilling for walls/ Ramps where required complete in all respects as per drawings, specifications and as directed by the Consultant/Engineer.
Specification
9'' (228 mm) Thick or Above Cft
Specification
6" (150 mm) Thick or Above Cft
Specification
PLASTER WORK
Specification
Providing and applying Plaster (thickness and cement / sand ratio as indicate in sub items below) including making edges and corners, curing, scaffolding etc, complete in all respects as per drawings, specifications and as directed by the Consultant/Engineer.
Specification
12mm Thick in (1:4) on walls Sft
Specification
P.C.C FLOORING
Specification
Providing and laying of PCC 1:2:4 under floor using one part ordinary portland cement, four parts of best quality sand and eight parts of crush stone including leveling, compacting, curing and surface finishing a srequired, complete in all respects as per drawing, specifications and as directed by the Engineer.
Specification
50mm Thick (Rough Finish) Sft
Specification
PORCELAIN TILES
Specification
Providing and laying floors of Porcelain tiles 1200mm X 600mm (grit white) 11mm thick of Roka ceram tile imported made (Chaina or equavilent including base mortar (1-1/2" average) thick c.c and matching colour, cement slurry for fixing of tiles, complete in all respects as per drawings, specifications and as directed by the Engineer. Sft
Specification
GRANITE SKIRTING
Specification
Providing and laying Skirting of Porcelain tiles 100mm X 600mm/1200mm (Conoliaen Brown) 11mm thick of takceram tile imported made (Chaina or equavilent including base mortar (2-1/2" average) thick c.c and matching colour grouting, cement slurry for fixing of tiles, complete in all respects as per drawings, specifications and as directed by the Engineer. Rft
Specification
Providing and laying 19mm thick pre-polished Cherry Pink Granite / tropical grey Granite on stair threshold floor, wall etc, including base mortar and matching colour, cement slurry for fixing of tiles, complete in all respects as per drawing, specifications and as directed by the Consultan Sft
Specification
PARTITION
Specification
Providing and fixing of Glass partition consisting of 12mm thick imported clear tempered glass with frosting paper in pattern as shown on drawings, with approved aluminum H section/ solid oak wooden section 6"x2'' thick frame finished with lacqure polish approved shade as frame on top and bottom and sides and all necessary joinery details complete in all respects as per drawing, specifications and as directed by the Consultant / Engineer. Sft
Specification
Removing and re-fixing of 12mm glass partion including with frosting paper in pattern as shown on drawings, with approved aluminum H section/ solid oak wooden section 2'' thick finished with lacqure polish approved shade as frame on top and bottom and sides and all necessary joinery details complete in all respects Sft
Specification
INTERNALPAINT WORKS
Specification
Providing and applying Paint on internal/ External walls of ICI or Berger including rubbing with sand stone, filling the uneven surfaces with putty, rubbing with sand paper and preparation of surface perfect in all respects, applying one coat of primer on prepared surface of plastered and finish paint coats as indicated in sub items, complete in all respects as per drawings.
Specification
Plastic Emulsion Paint ash white (on Internal walls) Sft
Specification
Weather shield paint on external walls (approved by the Engineer) Sft
Specification
FALSE CEILING
Specification
Providing and fixing 7.5mm thick Lamination gypsum tile 600mm x 600mm False including hanging system(Groove), making opening for lights or diffuser complete in all respects as per drawing, specifications and as directed by the Consultant / Engineer. Sft
Specification
RAILING
Specification
Providing and fixing of Stainless steel pipe grade 304 non-magnatic as Railing of 50mm dia Top and 40mm stainless vertical pipe as blustrade, 12mm dia stainless steel horizontal pipe 3 nos including all necessary joinery details and applying of approved paint complete in all respects as per drawing, specifications and as directed by the Consultant / Engineer. Rft
Specification
collapsible doors
Specification
Providing fabricating & fixing at any floor, steel grill collapsible doors with louver made of standard M.S Channel ¾”x1/8” M.S Flat ¾”x1/4” including roller of T-Iron rail 1 ½” x1 ½”x ½” with all hangers, bearing box, tracks, guide channel pull handles locking arrangement, and vertical louvers making good all cut work etc finished with 3 coats of enamel paint to requisite shade over red lead primer, complete in all respect as per specification or as directed by the Engineer Incharge. Sft
Specification
Providing and fixing of M.S steel sheet 14SWG on both sides and M.S pipe frame 16SWG frame at inner side of leaf, door frane of M.S angle Iron+M.S dtrip, applying of approved enamel paint and all necessary joinery details, complete in all respect. Sft
Specification
WALL CLADDING
Specification
Providing and fixing of wall cladding with 17mm thick approved design and shade laminated tectile sheet # 4025 made by alnoor or equivalent with partal wood frame size 2"x1" at 2' C/C, having vertical stripes 1" wide x 3/4" thick @ 1" c/c spacing finished with maching color lipping best quality. complete in all respect as per specification or as directed by the Engineer Incharge. Sft
Specification
FIBER GLASS SHED
Specification
P/F of fiber glass canopy 3mm thick best quality approved shade with MS 2" dia pipe vetical round post with foundation mix ratio of 1:2:4 having size of 1-'00x1'-00 and 2'-00 depth of footing, and 11/2"x11/2" frame with 1"x1" with coat of red oxide and three coat of enamel paint ICI Delux etc. Complete in all respect as per entire satisfaction. Sft
Specification
Wooden Pelmet
Specification
P/F of wooden pelmet made of MDF lassani 1'-6" wide and 4" high with partal wooden frame internal structure size 2"x1-1/2" covered with MDF lassani 1/2" thick with holes light holes and apply three coats of mattfinish paint etc. Complete in all respect etc. Rft
Specification
Excavation in all types of soil and up to any depth including removal of excavated material from site at desired location, job complete in all respects. Job
Specification

Official source

Always confirm dates, documents, and submission instructions on the originating portal.

View original tender on Federal PPRA / EPADS